The door openers of CNC AutoDoor are designed to automatically open and close the door(s) of CNC machines. The servo-controlled door openers are supplied with a control cabinet, equipped with a Siemens control module which is self-learning and automatically detects resistance. Thus the CNC AutoDoor is 100% safe and can be used without additional limit switches, light curtains, pressure switches etc. The CNC AutoDoor comes with a set of universal mounting brackets, allowing the system to be installed on any CNC machine. The door opener can be controlled using the I/O signals available in the CNC machine or with additional mounted push buttons. Of course, the manual that is supplied with the CNC AutoDoor carefully explains how to install it in a proper and safe manner.
Stroke: | from 300 mm to 1000 mm |
L x W x H: | 1410 x 125 x 130 mm |
Maximum weight machine door: | 180 kg |
Stroke: | from 300 mm to 1000 mm |
L x W x H: | 1410 x 125 x 130 mm |
Maximum weight machine door: | 400 kg |
Stroke: | from 300 mm to 1500 mm |
L x W x H: | 1910 x 125 x 130 mm |
Maximum weight machine door: | 180 kg |
Stroke: | from 300 mm to 1500 mm |
L x W x H: | 1910 x 125 x 130 mm |
Maximum weight machine door: | 400 kg |
Stroke: | from 300 mm to 2000 mm |
L x W x H: | 2420 x 125 x 130 mm |
Maximum weight machine door: | 400 kg |
Stroke: | from 300 mm to 3000 mm |
L x W x H: | 3490 x 125 x 130 mm |
Maximum weight machine door: | 400 kg |
Stroke: | from 300 mm to 750 mm (2x) |
L x W x H: | 1910 x 125 x 130 mm |
Maximum weight machine door: | 90 kg |
These door openers consist of 1 single door opener that opens 2 machine doors simultaneously with 1 controller. The travel of the 2 doors must be equal and in opposite directions.
Stroke: | from 300 mm to 750 mm (2x) |
L x W x H: | 1910 x 125 x 130 mm |
Maximum weight machine door: | 200 kg |
These door openers consist of 1 single door opener that opens 2 machine doors simultaneously with 1 controller. The travel of the 2 doors must be equal and in opposite directions.
Stroke: | from 300 mm to 1000 mm (2x) |
L x W x H: | 2410 x 125 x 130 mm |
Maximum weight machine door: | 200 kg |
These door openers consist of 1 single door opener that opens 2 machine doors simultaneously with 1 controller. The travel of the 2 doors must be equal and in opposite directions.
Stroke: | from 300 mm to 1500 mm (2x) |
L x W x H: | 3490 x 125 x 130 mm |
Maximum weight machine door: | 200 kg |
These door openers consist of 1 single door opener that opens 2 machine doors simultaneously with 1 controller. The travel of the 2 doors must be equal and in opposite directions.
Stroke: | from 300 mm to 1000 mm (2x) |
L x W x H: | 1410 x 125 x 130 mm (2x) |
Maximum weight machine door: | 180 kg |
These door openers consist of 2 separate single door openers with 2 controllers. Each machine door can be opened independently from the other.
Stroke: | from 300 mm to 1000 mm (2x) |
L x W x H: | 1410 x 125 x 130 mm (2x) |
Maximum weight machine door: | 400 kg |
These door openers consist of 2 separate single door openers with 2 controllers. Each machine door can be opened independently from the other.
Stroke: | from 300 mm to 1500 mm (2x) |
L x W x H: | 1910 x 125 x 130 mm (2x) |
Maximum weight machine door: | 180 kg |
These door openers consist of 2 separate single door openers with 2 controllers. Each machine door can be opened independently from the other.
Stroke: | from 300 mm to 1500 mm (2x) |
L x W x H: | 1910 x 125 x 130 mm (2x) |
Maximum weight machine door: | 400 kg |
These door openers consist of 2 separate single door openers with 2 controllers. Each machine door can be opened independently from the other.
Stroke: | from 300 mm to 2000 mm (2x) |
L x W x H: | 2420 x 125 x 130 mm (2x) |
Maximum weight machine door: | 400 kg |
These door openers consist of 2 separate single door openers with 2 controllers. Each machine door can be opened independently from the other.
Stroke: | from 300 mm to 3000 mm (2x) |
L x W x H: | 3490 x 125 x 130 mm (2x) |
Maximum weight machine door: | 400 kg |
These door openers consist of 2 separate single door openers with 2 controllers. Each machine door can be opened independently from the other.
Stroke: | 1 x 1500 and 1 x 750 mm |
L x W x H: | 1910 x 235 x 210 mm |
Maximum weight machine door: | 400 kg |
These door openers consist of 1 single door opener that opens 2 machine doors simultaneously with 1 controller. The travel of the 2 doors must be in a ratio of 2:1 and in the same direction.
Stroke: | 1 x 2000 and 1 x 1000 mm |
L x W x H: | 2420 x 235 x 210 mm |
Maximum weight machine door: | 400 kg |
These door openers consist of 1 single door opener that opens 2 machine doors simultaneously with 1 controller. The travel of the 2 doors must be in a ratio of 2:1 and in the same direction.
Stroke: | 1 x 3000 and 1 x 1500 mm |
L x W x H: | 3490 x 235 x 210 mm |
Maximum weight machine door: | 400 kg |
These door openers consist of 1 single door opener that opens 2 machine doors simultaneously with 1 controller. The travel of the 2 doors must be in a ratio of 2:1 and in the same direction.
The prevention of physical
complaints in manual operation of the CNC machine
A very common problem among operators is that their arms and joints can become overloaded as a result of the frequent opening of the machine door. This can be resolved by the CNC AutoDoor. The automatic door opener can be controlled from the control panel of the CNC machine or via optional pressure sensors.
Use in combination with robot
automation of your CNC machine
An automatic door is a necessary condition for the robot automation of your CNC machine. If the automatic door does not come standard with the CNC machine, then the CNC AutoDoor is the perfect universal solution for all brands of CNC machines.
“When we need to install a robot and the CNC machine is not equipped with
an automatic door, we always choose the CNC Autodoor. It is of very high
quality, 100% reliable and easy to install on any brand of machine. All of the installations
that we have so far with the CNC AutoDoor work perfectly.”
A robot integrator from Germany
“Our employees were having physical complaints, which led to long-term
outages. Opening a machine hundreds of times per day is simply not the way
things are done these days. The CNC AutoDoor is quick and safe and much better
for the health of our employees. All our CNC machines will now automatically
open with the CNC AutoDoor.”
The owner of a machine factory in the Czech
Republic
“As our CNC machines cannot be supplied on time with an automatic door
opener, we immediately order a CNC AutoDoor. This is directly available from
stock and easy to install. And thanks to the servo-technology, we no longer
have to fiddle with limit switches, pneumatics or sensors. The CNC AutoDoor is
the most reliable system available.”
A machine tool dealer from the Netherlands
CNC AUTODOOR BV • Hogebrinkerweg 19 • NL-3871 KM Hoevelaken • The Netherlands
info@cncautodoor.com • +31 (0)33 202 47 55
Company ID: 67031919 • VAT-no.: NL8568.01.501.B01 • IBAN: NL20 ABNA 0485 1582 13
CNC AutoDoor® Copyright 2021